| Item | Quantity | Storage |
|---|---|---|
| STM (Make sure that all STM tubes indicate the same stain temperature on the label) |
1 tube (per 4 BeadChips) | -25° to -15°C |
| MA2 | 1 tube (per 96 samples) | -25° to -15°C |
| XC1 | 1 tube (per 4 BeadChips) | -25° to -15°C |
| XC2 | 1 tube (per 4 BeadChips) | -25° to -15°C |
| FMS | 1 tube (per 96 samples) | -25° to -15°C |
| ATM | 1 tube (per 4 BeadChips) | -25° to -15°C |
| MSM | 1 tube (per 96 samples) | -25° to -15°C |
| MA1 | 1 tube (per 96 samples) | -25° to -15°C |
| RA1 | 7 ml per 96 samples | -25° to -15°C |
| TEM | 1 tube (per 4 BeadChips) | -25° to -15°C |
| RA1 | 10 ml for 1–8 BeadChips 20 ml for 9–16 BeadChips 30 ml for 17–24 BeadChips |
-25° to -15°C |
| PM1 | 1 tube (per 96 samples) | 2° to 8°C |
| Hyb Chamber inserts | 12x1 HD BeadChip: 8 24x1 HD BeadChip: 4 |
N/A |
| Te-Flow Flow-Through Chambers (with black frames, spacers, glass back plates, and clamps) |
1 (per BeadChip) | N/A |
| Hyb Chamber gaskets | 12x1 HD BeadChip: 2 24x1 HD BeadChip: 1 |
N/A |
| Hyb Chamber | 12x1 HD BeadChip: 2 24x1 HD BeadChip: 1 |
N/A |
| Multi-Sample BeadChip Alignment Fixture | 1 (per 4 BeadChips) | N/A |
| Wash Rack | 1 (up to 8 BeadChips) | N/A |
| BeadChips | 12x1 HD BeadChip: 8 24x1 HD BeadChip: 4 |
N/A/td> |
| PB2 | 12x1 HD BeadChip: 2 tubes 24x1 HD BeadChip: 1 tube |
Room temperature |
| PB1 | 550 ml (up to 8 BeadChips) | Room temperature |
| PB2 | 310 ml for 1–8 BeadChips 285 ml for 9–24 BeadChips |
Room temperature |
| XC4 | 310 ml for 1–8 BeadChips 285 ml for 9–24 BeadChips |
Room temperature |
| XC3 | 50 ml for 1–8 BeadChips 100 ml for 9–16 BeadChips 150 ml for 17–24 BeadChips |
Room temperature |
| Item | Quantity | Storage |
|---|---|---|
| 95% formamide/1 mM EDTA | 15 ml for 1–8 BeadChips; 17 ml for 9–16 BeadChips; 25 ml for 17–24 BeadChips |
-25° to -15°C |
| WG#-DNA plate with 96 DNA samples (50 ng/µl) | 1 plate | -25° to -15°C |
| 96-well 0.8 ml microtiter plate (MIDI) | 1 plate | N/A |
| Lambda DNA | See instructions | 2° to 8°C |
| PicoGreen dsDNA quantitation reagent | See instructions | 2° to 8°C |
| 0.1N NaOH | 15 ml (per 96 samples) | 2° to 8°C |
| 96-well 0.65 ml microtiter plate | 1 per 96 samples | N/A |
| 1X TE (10 mM Tris-HCl pH8.0, 1 mM EDTA (TE)) | See instructions | Room temperature |
| 100% 2-propanol | 40 ml (per 96 samples) | Room temperature |
| Alconox Powder Detergent | As needed | Room temperature |
| EtOH | As needed | Room temperature |
| Fluotrac 200 96-well flat-bottom plate | 1 per Std DNA plate 1 per Sample DNA plate |
N/A |